C10 Mosites Butterfly Valve
2" - 36"
2" - 30" 150 PSI SERVICE
36" 125 PSI SERVICE
The Mosites C10 Butterfly Valve, which is fully elastomer lined, is in use throughout the world in a wide range of critical service applications. The control of water, chemicals, air, slurries, and vapors to 150 psi bubble-tight shut off can be achieved with the Mosites Butterfly Valve.
Engineering Data for the C10 Valve
- A STEM - STEEL ASTM A-311 AISI GRADE C1144
One piece, full length stem is internally keyed to disc insert. - B BODY - CAST CARBON STEEL ASTM A-216 GRADE WCB WAFER OR LUG
Stronger than cast or ductile iron. Not subject to thermal shock. Also available in stainless steel and aluminum. - C DISC INSERT - ATSM A-108 AND A-487 GRADE 4N
Lining material bonded to steel. Disc internally keyed to shaft. - D EXTERIOR FINISH
High Gloss Epoxy. Maximum protection from environmental corrosion. - E GASKET SURFACE
Bonded to valve body. Will not "fold" on insertion between flanges.
- F BUSHING - RYTON/TFE
Reinforced top stabilizer bushing prevents side loading. - G STEM SEAL
Top patented ball and socket design. - H BODY LINER
Molded and bonded to body; prevents seat blowout. - I STEM SEAL
Bottom patented ball and socket design. - J BUSHING - RYTON/TFE
Reinforced bottom stabilizer bushing prevents side loading. - K STEM RETAINING RING
Insures positive retention of shaft.
The quarter turn operation of the disc is easily accomplished by the handlever (with friction lock positioner) or weatherproof gear operator. For pneumatic or electric actuation packages, see Automated Valves. The Mosites Butterfly Valve meets ANSI B16.104, Class VI, bi directional shut-off specifications, and is for use with ANSI B 16.5 (2"-24") ANSI B16.47A (30"-36") dimensional 150# flanges. The valve can be used for full vacuum and dead end service.
